Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Removal - Clutch Pedal - Clutch System - Kia Rio UB 2012-2020 Service ManualKia Rio: Removal


     
•
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
1.
Disconnect the ignition lock switch connector (A) and clutch switch (B).


2.
Disconnect the push rod (B) from the clutch pedal by removing the snap pin (A) and washer.
3.
Remove the clutch pedal mounting nuts (A-4ea).
Tightening torque:
9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)


4.
Remove the clutch pedal assembly.
Inspection
Clutch Pedal Inspection 1. Measure the clutch pedal height (from the face of the pedal pad to the floorboard) and the clutch pedal clevis pin play (measured at the ...
Installation
1. Installation is in reverse order of removal. ...
See also:

Using Bluetooth® Wireless Technology
Phone Menu Screen Phone Menus With a Bluetooth® Wireless Technology device connected, press the key to display the Phone menu screen. 1) Favorite : Up to 20 frequently used contacts saved for ...

Sub Frame Replacement
1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Cluster Ionizer (FATC only) Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the glove box. (Refer to BD group - "Crash Pad") ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts