Kia Rio: Description

The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. ATF passes through the oil filter and gets distributed along the oil channels. The oil becomes highly pressurized as it exits the oil pump and passes through the line pressure valve before being fed to the clutch & brake control valve, clutch, and brakes. TCM controls the hydraulic pressure using solenoid valves and controls clutch and brake operations.

Hydraulic System

...

Components Location

1. Automatic transaxle 2. Valve body assembly 3. Oil pump assembly ...

See also:

Fuel Filter Replacement
1. Remove the fuel pump (Refer to “Fuel Pump” in this group). 2. Disconnect the electric pump wiring connector (A) and the fuel sender conn ...

SS-B Solenoid Valve(ON/OFF) Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

Front Door Adjustment
Glass Adjustment    • Check the glass run channel for damage or deterioration, and repl ...