Kia Rio: Dynamic Damper Replacement

1.	Remove the front driveshaft. (Refer to DS group - “Front Driveshaft”)

2.	Remove the TJ joint assembly. (Refer to DS group - “TJ joint”)

3.	Remove the remove the both side of band (B) of the dynamic damper (A).

4.	Fix the driveshaft (A) with a vice (B) as illustrated.

5.	Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is removed.

6.	Seperate the dynamic damper (A) from the shaft (B) carefully.

Dynamic Damper Components

1. BJ assembly 2. Circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly 1 ...

Dynamic Damper Installation

1. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper. 2. Install the dynamic damper. ...

Kia Rio: Dynamic Damper Replacement

Dynamic Damper Components

Dynamic Damper Installation

See also: