Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Inspection - Canister Close Valve (CCV) - Engine Control System - Engine Control / Fuel System - Kia Rio UB 2012-2020 Service ManualKia Rio: Inspection

1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV terminal 1 and 2.
4.
Check that the resistance is within the specification.

Specification: Refer to "Specification"

5.
Disconnect the vapor hose connected with the canister from the CCV.
6.
Connect a vacuum pump to the nipple.
7.
Ground the CCV control line and apply battery voltage to the CCV power supply line.
8.
Apply vacuum and check the valve operation.

Specification: Vacuum maintained

Circuit Diagram
(M/T) (A/T) ...
Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. D ...
See also:

Oil Pump Unit (OPU) Connector
Opu Connector Terminal Function EGGG114-A EGGG114-B Pin No. Description Pin No. Description 1 Motor power(W) ...

Component(2)
...

35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications
Direct control VFS[35R/C] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts