Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Removal - Canister Close Valve (CCV) - Engine Control System - Engine Control / Fuel System - Kia Rio UB 2012-2020 Service ManualKia Rio: Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Lift the vehicle.
3.
Disconnect the canister close valve connector (A).
4.
Disconnect the ventilation hose (B) from the fuel tank air filter and canister close valve.
5.
Remove the fuel tank air filter assembly after removing a bolt (A).
6.
Remove the bracket (A) after pulling it.
7.
Release the lever (A) by lifting it up.
8.
Remove the canister close valve (B) from the fuel tank air filter (C) after rotating it in the direction of the arrow in the figure.
Inspection
1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV termina ...
Installation
   • Install the component with the specified torques. • ...
See also:

Display settings
Press the key Select [Display] through TUNE knob or key Select menu through TUNE knob Mode Pop up [Mode Pop up] Changes / selection mode During On state, press the or key to d ...

Description
Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the piston pos ...

Sunroof Switch Inspection
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the overhead console cover (A). ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts