Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Preparation Of Tools And Measuring Equipment - General Information - Kia Rio UB 2012-2020 Service ManualKia Rio: Preparation Of Tools And Measuring Equipment

Be sure that all necessary tools and measuring equipment are available starting work.
Special Tools
Use special tools when they are required.

Removal Of Parts


Removal Of Parts
First find the cause of the problem and then determine whether removal or disassembly before starting the job.

Disassembly


Disassembly
If the disassembly procedure is complex, requiring many parts to be disassembled, all parts should be disassembled in a way that will not affect their performance or external appearance.
1.
Inspection of parts
Each part, when removed, should be carefully on suspected for malfunction, deformation, damage, and other problems.
2.
Arrangement of parts
All disassembled parts should be carefully arranged for effective reassembly.
Be sure to separate and correctly identify the parts to be replaced from those that will be used again.
3.
Cleaning parts for reuse
All parts to be used again should be carefully and thoroughly cleaned by an appropriate method.
Parts
When replacing parts, use KIA MOTORS genuine parts.

Replacement


Replacement
Standard values, such as torques and certain adjustments, must be strictly observed in the reassembly of all parts.
If removed, the following parts should always be replaced with new ones.
1.
Oil seals
2.
Gaskets
3.
O-rings
4.
Lock washers
5.
Cotter pins (split pins)
6.
Plastic nuts


Depending on their location.
7.
Sealant should be applied to gaskets.
8.
Oil should be applied to the moving components of parts.
9.
Specified oil or grease should be applied to the prescribed locations (oil seals, etc) before assembly.
Adjustment
Use gauges and testers to adjust correctly the parts to standard values correctly.
General Service Information
Protection Of The Vehicle Always be sure to cover fenders, seats, and floor areas before starting work.    The s ...

Electrical System
1. Be sure to disconnect the battery cable from the negative (-) terminal of the battery. 2. Never pull on the wires when disconnecting con ...

See also:

Using Bluetooth® Wireless Technology
Phone Menu Screen Phone Menus With a Bluetooth® Wireless Technology device connected, press the key to display the Phone menu screen. 1) Favorite : Up to 20 frequently used contacts saved for ...

Ignition Switch Assembly Installation
1. Install the key lock cylinder.    When assembling, the key must be insert ...

Component Location (1)
1. Interior antenna 1 2. Interior antenna 2 3. Door outside handle 4. Buzzer 5. Smart key unit 6. SSB (Start Stop Button) ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts