Rio Car Manuals
Technical Info

Kia Rio: Relay Box (Engine Compartment) Inspection

Replacement of EMS box

1.	Disconnect the negative (-) battery terminal.

2.	Push hooks in the engine room relay box out to the arrow direction and put up the EMS box assembly (A).

3.	Disconnect the connector (A) and remove the EMS box assembly (B).

Fuse Inspection

1.	Be sure there is no play in the fuse holders, and that the fuses are held securely.

2.	Are the fuse capacities for each circuit correct?

3.	Are there any blown fuses? If a fuse is to be replaced, be sure to use a new fuse of the same capacity. Always determine why the fuse blew first and completely eliminate the problem before installing a new fuse.

Multi Fuse

Multi Fuse is for optimizing the engine room package.

-	Multi fuse (A) is needed to replace entirely when there is damage to only one fuse.

-	When replace the multi fuse, refer to the "Engine compartment - component location" diagram exactly.

-	Use the multi fuse capacities for each circuit correctly.

Relay Box (Engine Compartment) Components

...

Relay Box (Passenger Compartment) Components

...

See also:

Rear Hub - Carrier Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. C ...

Turn Signal Lamp (Door mirror) Installation
Door Mirror Turn Signal Lamp 1. Install the door mirror turn signal lamp to the door mirror. 2. Install the door mirror. ...

Front Bumper Replacement
• Put on gloves to protect your hands. • U ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts