Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Steering Column and Shaft Inspection - Electric Power Steering - Steering System - Kia Rio UB 2012-2020 Service ManualKia Rio: Steering Column and Shaft Inspection

1.
Check the steering column for damage and deformation.
2.
Check the steering column for damage and deformation.
3.
Check the join bearing for damage and wear.
4.
Check the tilt bracket for damage and cracks.
5.
Check the key lock assembly for proper operation and replace it if necessary.
Steering Column and Shaft Disassembly
Key lock assembly 1. Make a groove on the head of special bolts (A) with a chisel. 2. Loosen the special bolt using a screw driver a ...
Steering Column and Shaft Adjustment
After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symp ...
See also:

Components
1. Union bolt 2. Gasket 3. Tube joint 4. Clutch tube 5. Valve plate 6. Valve spring 7. Bleeder screw 8. Release cylinder 9. Return spring 10. Piston 11 ...

Measurement Method
Projected Dimensions 1. These are the dimensions measured when the measurement points are projected into the reference plane, and are the reference dimensions ...

AGM Battery: Description
AGM battery is used for especially heavy load on the vehicle network depending on equipment and requirements. AGM stands for Absorbent Glass Material Battery; that is absorbent glass fibre fl ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts