Rio Car Manuals
Technical Info

Kia Rio: Torque Converter Control Solenoid Valve (T/CON_VFS) Inspection

1.	Turn ignition switch OFF.

2.	Disconnect the solenoid valve connector.

3.	Measure resistance between sensor signal terminal and sensor ground terminal.

4.	Check that the resistance is within the specification.

Torque Converter Control Solenoid Valve (T/CON_VFS) Circuit Diagram

...

Torque Converter Control Solenoid Valve (T/CON_VFS) Removal

1. Remove the battery and the battery tray. (Refer to "Charging system" in EE group.) 2. Remove the under cover (A). ...

See also:

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line (Refer to the ...

Alternator: Specification
Items Specification ISG Alternator Rated voltage 13.5V, 110A Speed in use 1,000 ~ 18,000rpm Voltage regulator ...

26 Brake Control Solenoid Valve(26/B_VFS) Description
26 brake control solenoid valve(26/B_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26 brake. ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts