Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Valve Body Installation - Hydraulic System - Automatic Transaxle System - Kia Rio UB 2012-2020 Service ManualKia Rio: Valve Body Installation

1.
Installation is the reverse of removal.

     
After replacement or reinstallation procedure of the valve body assembly, must perform procedures below.

     
The gasket of the valve body gasket (A) use new one.


Adding automatic transaxle fluid.
(Refer to "Hydraulic system (Fluid)" in this group)
Perform TCM learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup. (Refer to "Automatic transaxle control system (Repair procedures)" in this group)
Valve Body Removal
1. Remove the battery and the battery tray. (Refer to "Charging system" in EE group.) 2. Remove the under cover (A). ...
Clutch & Brake
The 6-spd automatic transaxle consists of an overdrive clutch (OD/C), a one-way clutch (OWC), a lower and reverse brake (LR/B), an underdrive brake (UD/B), a 26 brake (26/B), and a 35R clutch ...
See also:

Passenger Airbag (PAB) Module Components
...

Replacement
Problems And Replacement Parts: Problem Part set Scan tool required? All keys have been lost Blank key (4) YES Antenna coil unit does n ...

Instrument Cluster Removal
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or romover, remove the cluster fascia panel (A). ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts