Kia Cee'd: Dual Clutch Transmission Control System / Input Speed Sensor 1 Repair procedures
Kia Cee'd JD Service Manual / Dual Clutch Transmission(DCT) System / Dual Clutch Transmission Control System / Input Speed Sensor 1 Repair procedures
| Inspection |
Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor.
| Removal |
| 1. |
Turn off the ignition switch and then disconnect the battery (-) cable.
|
| 2. |
Remove the under cover.
|
| 3. |
Disconnect the input shaft speed sensor connector (A).
|
| 4. |
Loosen the mounting bolt and then remove the input shaft speed sensor
(B).
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
Input Speed Sensor 1 Schematic diagrams
Schematic Diagrams
...
Input Speed Sensor 2 Description and operation
Description
The input shaft speed sensor is important in that it detects the input shaft
RPM and sends this information to the Transmission Control Module (TCM).
It provides i ...
Other information:
Kia Cee'd JD Service Manual: Heated Washer Nozzle Repair procedures
Removal
1.
Remove the cowl top cover.
(Refer to the BD group - "Cowl Top Cover")
2.
Disconnect the heated washer nozzle connectors (A).
3.
Remove the heated washer nozzle (A) aft ...
Kia Cee'd JD Service Manual: Input Speed Sensor 2 Repair procedures
Inspection
Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor.
Removal
1.
Turn off the ignition switch and then disconnect the battery (-) cable.
2.
Remove the under cover.
3.
...