Kia Rio: Rear Door / Rear Door Power Window Regulator
Components and components location
Repair procedures
|
Put on gloves to protect your hands.
|
| • |
Use a plastic panel removal tool to remove interior trim pieces
without marring the surface.
|
| • |
Be careful not to bend or scratch the trim and panels.
|
|
| 1. |
Remove the rear door window glass.
(Refer to Rear Door - "Rear Door Window Glass")
|
| 2. |
Disconnect the rear door power window motor connector (A).
|
| 3. |
Loosen the rear door power window regulator mounting nuts.
|
Tightening torque :
3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)
|
|
| 4. |
Remove the rear door power window regulator (A).
|
| 5. |
Install in the reverse order of removal.
| •
|
Check that glass operation is normal.
|
| •
|
Check the damage glass channel, and replace if necessary.
|
| •
|
Adjust glass if necessary.
|
|
|
Components and components location
Component Location
1. Rear door window glass
Repair procedures
Replacement
...
Components and components location
Component Location
1. Rear door outside handle
Repair procedures
Replacement
...
Other information:
Description and operation
Description
Vehicles have many control units that use more electricity. These units control
their own system based on information from diverse sensors. It is important to have
a stable power supply as there diverse sensors giving a variety of information. ...
Components and components location
Components
1. Timing chain
2. Timing chain cam guide
3. Timing chain guide
4. Timing chain crank guide
5. Timing chain tensioner arm
6. Timing chain tensioner
Repair procedures
Removal
...
Rear Door Window Glass
Rear Door Outside Handle