Kia Rio: TPMS Receiver Description
1. |
Mode
|
(1) |
Virgin State
|
| A.
The receiver as a sole part is shipped in this
state. Replacement parts should therefore arrive in
this state.
|
| B.
In this state, there is no sensor monitoring and
no DTC monitoring.
|
| C.
The state indicates that platform specific parameters
must be written to the receiver and that sensors are
un-learned.
|
(2) |
Normal State
|
| A.
In order for tire inflation state and DTC monitoring
to occur, the receiver must be in this state.
|
| B.
In this state, automatic sensor learning is enabled.
|
(3) |
Test State
|
| A.
This state is only used in manufacturing plant
to check RF transmission between sensor and receiver.
|
2. |
Overview
|
| A.
Receives RF data from sensor.
|
| B.
Uses sensor data to decide whether to turn on TREAD Lamp.
|
| C.
Learn TPM sensor for under inflation monitoring automatically.
|
| D.
Uses sensor information, distance travelled, background
noise levels, Auto-learn status, short / open circuit output
status, vehicle battery level, internal receiver states to determine
if there is a system or a vehicle fault.
|
As manual for diagnosis methods by using diagnosis device, the main contents
are as follows:
1.
Connect self-diagnosis connector(16pins) located in the lower
of driv ...
1.
General Function
A.
Auto-learn takes place only once per Ignition cycle.
B.
On successful compl ...
See also:
Disassembly
1.
Fix the steering gear box assembly (A) on the vice.
2.
Remove the bellows clip (A) in the direction of the arrow. (The
left and ...
Radiator: Description
[Air conditioning type]
The cooling fan operates in 2 stages (HIGH/LOW). The engine control module
(ECM) controls the cooling fan according to the coolant temperature, vehicle
speed and A ...
Components Operations
ECM (Engine Control Module)
1.
The ECM(PCM) (A) carries out a check of the ignition key using
a special encryption algorithm, which is programmed into the transponder
...