Kia Rio: 4Door Front Body A
|
|
|
|
| Hood hinge mounting hole (Ø11) |
Fender apron upper member tooling hole (Ø6.6) |
Front shock absorber housing cover tooling hole (Ø7) |
|
|
|
|
| Front shock absorber housing cover tooling hole (Ø7) |
Roof panel front corner |
Front pillar outer panel corner |
Measurement Method
4Door Front Body BFailure Diagnosis
1.
In principle, ESC and TCS controls are prohibited in case of ABS
failure.
2.
When ESC or TCS fails, only the failed system control is pr ...
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
Receiver-Drier Replacement
1.
Remove the condenser.
2.
Remove the cap (B) on the bottom of the condenser with L wrench
(A).
Tightening torq ...
